Whether you need an all-day continuous power or backup power, none are built tougher than this 8kVA, 240V diesel generator!
This water-cooled, low RPM (1500 RPM) 8kVA generator can provide continuous stable power at prime load for up to 30 hours and withstand the extremely hot conditions in Australia’s North, no wonder it’s our best-seller generator for prime or standby use in residential, commercial, or farming operations.
- Prime Power: 8kW / 8kVA 240 Volts 33Amps
- Standby Power: 8.8kW / 8.8kVA
- Power Factor: 1
- Phase Voltage: Single Phase 240 Volt
- Frequency: 50 Hertz
- Engine: OEM 3 Cylinder Diesel
- RPM: 1500/min
- Cooling Method: Water Cooled – Rated For Australia’s North
- Alternator: Single Phase 4 Pole Brushless Synchronous -/c AVR
- Starter System: 12-volt Electric – Battery Included
- Controller: Smartgen HGM4010N
- 2 Wire / Remote Start Capable
- Over Temperature Protection
- Over Current Protection
- Low Oil Protection
- Safety Systems: Battery Isolator
- Emergency Stop
- Failsafe Shutdown Fuel Solenoid
- Running Time: 30 Hours Continuous (prime load)
- Fuel Consumption: 2 Litres/Hour (prime load)
- Chassis Enclosure: Lockable
- Sound Deadening Throughout
- Weather-Resistant Powder Coating
- External Use
- Mine Site Ready Bunding: No
- ATS (Mains Failure): Easy Connect Plug (ATS Box Optional)
- Single Phase Outlets: 3 x 15 Amp IP66Three Phase Outlets : No
- Hardwire Terminals: Yes
- RCD: Australian Standard (IP67 Enclosed)
Additional Information
Prime Power (kVA) | 8 | |
---|---|---|
Standby Power (kVA) | 8.8 | |
Phase | Single | |
Engine Type | OEM | |
Cooling | Water Cooled | |
Controller | Smatgen HGM4010N | |
Noise level (dBA at 7m) | 65 | |
Fuel Tank Size (L) | 60 | |
Running Time (hrs) | 30 | |
Extras | TC | |
Weight (kg) | 560 | |
Dimensions (cm) | 72L x 141W x 111H |