- Prime Power: 18kW / 22kVA 415Volts 31Amps
- Standby Power: 20kW / 24kVA
- Power Factor: 0.8
- Phase Voltage: Three Phase 415 Volt
- Frequency: 50 Hertz
- Engine: OEM 4 Cylinder Diesel
- RPM: 1500/min
- Cooling Method: Water Cooled – Rated For Australia’s North
- Alternator: Three Phase 4 Pole Brushless Synchronous -/c AVR
- Starter System: 12-volt Electric – Battery Included
- Controller: Comap MRS11
- 2 Wire / Remote Start Capable
- Over Temperature Protection
- Over Current Protection
- Low Oil Protection
- Safety Systems: Battery Isolator
- Emergency Stop
- Failsafe Shutdown Fuel Solenoid
- Running Time: 20 Hours Continuous (prime load)
- Fuel Consumption: 4.5 litres/hour (prime load)
- Chassis Enclosure: Lockable
- Sound Deadening Throughout
- Weather-Resistant Powder Coating
- Stainless Steel Fittings
- External Use
- Mine Site Ready Bunding: Yes
- ATS (Mains Failure): Easy Connect Plug (ATS Box Optional)
- Single Phase Outlets: 2 x 15 Amp IP66
- Three Phase Outlets: 1 x 20 Amp IP66
- 1 x 32 Amp IP66
- Hardwire Terminals: Yes
- RCD / RCBO: Australian Standard (IP67 Enclosed)
Additional Information
Prime Power (kVA) | 22 | |
---|---|---|
Standby Power (kVA) | 24 | |
Phase | Three | |
Engine Type | OEM | |
Cooling | Water Cooled | |
Controller | Comap MRS11 | |
Noise level (dBA at 7m) | 65 | |
Fuel Tank Size (L) | 90 | |
Running Time (hrs) | 20 | |
Extras | TC | |
Weight (kg) | 770 | |
Dimensions (cm) | 167L x 76W x 117H |