- Prime Power: 22.0kW / 27.5kVA 415Volts 38Amps
- Standby Power: 24kW / 30kVA
- Power Factor: 0.8
- Phase Voltage: Three Phase 415 Volt
- Frequency: 50 Hertz
- Engine: Yanmar 4TNV98-GGE
- RPM: 1500/min
- Cooling Method: Water Cooled – Rated For Australia’s North
- Alternator: Stamford 3 Phase 4 Pole Brushless Synchronous -/c AVR
- Starter System: 12-volt Electric – Battery Included
- Controller: Comap MRS16 IL4 (European Made)
- 2 Wire / Remote Start Capable
- Over Temperature Protection
- Over Current Protection
- Low Oil Protection
- Safety Systems: Battery Isolator
- Emergency Stop
- Failsafe Shutdown Fuel Solenoid
- Running Time: 14 Hours Continuous (prime load)
- Fuel Consumption: 6.7 litres/hour (prime load)
- Chassis Enclosure: Lockable
- Sound Deadening Throughout
- Weather-Resistant Powder Coating
- Stainless Steel Fittings
- External Use
- Mine Site Ready Bunding: Yes
- ATS (Mains Failure): Easy Connect Plug (ATS Box Optional)
- Single Phase Outlets: 2 x 15 Amp IP66
- Three Phase Outlets: 1 x 20 Amp IP66
- 1 x 32 Amp IP66
- Hardwire Terminals: Yes
- RCD / RCBO: Australian Standard (IP67 Enclosed)
Additional Information
| Prime Power (kVA) | 27.5 | |
|---|---|---|
| Standby Power (kVA) | 30 | |
| Phase | Three | |
| Engine Type | Yanmar | |
| Cooling | Water Cooled | |
| Controller | Comap MRS16 IL4 | |
| Noise level (dBA at 7m) | 60 | |
| Fuel Tank Size (L) | 95 | |
| Running Time (hrs) | 14 | |
| Extras | TC | |
| Weight (kg) | 763 | |
| Dimensions (cm) | 172L x 75W x 115H |
