- Prime Power: 9kW / 9kVA 240 Volts 37Amps
- Standby Power: 10kW / 10kVA
- Power Factor: 1.0
- Phase Voltage: Single Phase 240 Volt
- Frequency: 50 Hertz
- Engine: OEM 3 Cylinder Diesel
- RPM: 1500/min
- Cooling Method: Water Cooled – Rated For Australia’s North
- Alternator: Single Phase 4 Pole Brushless Synchronous -/c AVR
- Starter System: 12 volt Electric – Battery Included
- Controller: Comap MRS12
- 2 Wire / Remote Start Capable
- Over Temperature Protection
- Over Current Protection
- Low Oil Protection
- Safety Systems: Battery Isolator
- Emergency Stop
- Failsafe Shutdown Fuel Solenoid
- Fuel Consumption: 2.2 litres/hour (prime load)
- Chassis Enclosure: Lockable
- Sound Deadening Throughout
- Weather Resistant Powder Coating
- Stainless Steel Fittings
- External Use
- Mine Site Ready Bunding: Yes
- ATS (Mains Failure): Easy Connect Plug (ATS Box Optional)
- Single Phase Outlets: 3 x 15 Amp IP66
- Hardwire Terminals: Yes
- RCD / RCBO: Australian Standard (IP67 Enclosed)
Additional Information
| Prime Power (kVA) | 9 | |
|---|---|---|
| Standby Power (kVA) | 10 | |
| Phase | Single | |
| Engine Type | OEM | |
| Cooling | Water Cooled | |
| Controller | Comap MRS12 | |
| Noise level (dBA at 7m) | 65 | |
| Fuel Tank Size (L) | 60 | |
| Running Time (hrs) | 27 | |
| Extras | Minespec | |
| Weight (kg) | 601 | |
| Dimensions (cm) | 142L x 73W x 112H |
